Product Overview

Applications

Suitable for vitrified tiles with various water absorption.

Suitable for smooth concrete wall.

Technical Specifications

The product complying with the requirements of type I in JC/T 907-2018 Interface treating agent for concrete. The main indicators are followed:

Testing items			Indicators
Tensile bond strength, MPa	Untreated		≥0.6
	treated	Water immersion treatment	≥0.5
		heat treatment
		freeze-thaw cyclestreatment
		Alkali treatment

The environmental protection indicators of the product in accordance with the requirements of GB18583-2008 Indoor decorating and refurbishing materials - Limit of harmful substances of adhesives. No toxic organic solvents such as benzene, xylene, toluene, ethylbenzene and halogenated hydrocarbons added to the product. The main environmental indicators are as follows:

Testing items	Indicators
Free formaldehyde, g/kg	≤1
Benzene, g/kg	≤0.2
Toluene and xylene，g/kg	≤10
TVOC, g/L	≤350

Construction Techniques

The back of vitrified tiles must be clean, free from oil, dirt, demoulding agent or any other contaminants.
Add liquid to the mixing bucket, and then slowly add the powders while mixing with mechanical agitator until a homogeneous paste without lumps is obtained. Wait 3 minutes prior to re-mixing well. Finally, it is ready for use. The mixed adhesive should be used in 1 hours.
Apply forcefully tile adhesive on the back of vitrified tiles with spatula in evenly distributed layer of 1 mm-2 mm thickness.
Then paste tiles with the prepared ordinary ceramic tile adhesive, or after the back adhesive cured.

Announcements

This mortar contains cement, which may cause skin and eye irritation. So please wear the necessary protective equipment during construction. If it touches your eyes, remove contact lenses and keep eyelids open. Rinse open eye immediately with plenty of running water. Seek medical advice if complaint continues. Keep out of reach of children.